How to Make Acrylic Snowflake Star Christmas Ornament


This post may contain affiliate links, sponsored content and products received at no cost.
6:00 AM
Seven colorful mirrored acrylic star snowflake ornaments made with an xTool P3 laser cutter

How to Make Acrylic Snowflake Star Christmas Ornaments with the xTool P3 Laser Cutter

Want to make a set of colorful, sparkly ornaments that look like stained glass but have the shine of mirrored acrylic? These DIY mirrored acrylic snowflake ornaments are a gorgeous addition to your Christmas tree! Made with the xTool P3 CO2 Laser and seven different colors of mirrored acrylic, each snowflake has its own unique combination of colors.

Finished multicolored star ornaments made from mirrored acrylic in purple, blue, green, pink, and gold.

I used a geometric snowflake design that can also look like a star ornament--but it has 6 points just like a snowflake, cut each design to about 5 inches tall, and mixed and matched the colorful pieces to create seven coordinating ornaments. The best part is that every ornament is a little different, but they all look beautiful together.

DIY geometric snowflake ornaments cut from colorful mirrored acrylic using an xTool P3

This project took a bit of patience, especially when it came to arranging the pieces and finding the right adhesive method. Thankfully, I figured out the perfect way to assemble them, and the finished ornaments have that brilliant, reflective finish I wanted.

Colorful mirrored acrylic snowflakes arranged together on a white background.

If you love colorful Christmas decorations, geometric designs, or projects that make your laser cutter shine, this is such a fun project to try during the holiday season.

Colorful mirrored acrylic sheets used to create geometric star and snowflake Christmas ornaments

Supplies for Mirrored Acrylic Snowflake Ornaments

DIY Christmas star ornaments featuring intricate geometric patterns and reflective acrylic colors

Choose seven colors of mirrored acrylic that look great together. You can use jewel tones, bright rainbow colors, pinks and purples, traditional Christmas colors, or any combination that suits your tree.

I used seven different colors because I wanted to make seven snowflakes and use the leftover cutout pieces from each design to fill the other snowflakes. This creates a coordinated collection with lots of color variation and very little visual repetition.

Close-up of a geometric star ornament made with purple, teal, pink, and gold mirrored acrylic

Step 1: Prepare the Geometric Snowflake Design

Start by downloading the free geometric snowflake design. I'll include the link to the design at the opt-in at the end of this post so you can use the same pattern for your own ornaments.

Import the design into xTool Studio and check that it is sized correctly. I made each snowflake 5 inches tall, which is a great size for a Christmas tree. They're large enough to show off all the little mirrored details without overwhelming the other ornaments.

It's very thin, so I wouldn't size it much smaller than 5 inches and it would be amazing scaled up!

Seven handmade starburst Christmas ornaments featuring colorful geometric acrylic pieces

Before cutting, make sure the design is set up correctly for your chosen material and machine. Use the appropriate settings for your specific mirrored acrylic, and always follow the manufacturer's guidance for laser compatibility.

Not every acrylic sheet is suitable for laser cutting. Confirm the material composition before putting it in your laser cutter, and never cut PVC or vinyl-containing materials.

Once the design is ready, duplicate it so you have seven copies. Arrange the designs on your virtual workspace to fit your seven pieces of colored mirrored acrylic as efficiently as possible.

Preparing mirrored acrylic panels for cutting intricate starburst ornament designs with an xTool P3

Step 2: Cut Seven Mirrored Acrylic Snowflakes

Place the first piece of mirrored acrylic in the xTool P3 and prepare the machine for cutting.

I cut one complete snowflake from each of the seven different colors. The goal is to have seven matching geometric outlines, each with its own collection of small, angular cutout pieces.

An xTool P3 laser cutter used to cut geometric snowflake ornaments from mirrored acrylic

The cutouts are what make this project so much fun. Each snowflake contains lots of little geometric shapes that can be swapped between colors, allowing you to create a completely different color combination for every ornament.

Use the material-specific settings recommended for your acrylic, and make sure the material is positioned securely before starting the job. Follow the xTool P3 operating instructions and ventilation requirements while cutting.

Laser-cut mirrored acrylic pieces for a colorful DIY star ornament project

When the cuts are finished, carefully remove the snowflake from the material.

Some of the little pieces may fall out on their own, while others might need a gentle nudge. I popped out any pieces that didn't fall free automatically, taking care not to scratch the mirrored finish or damage the delicate connecting sections.

Cutting intricate star shapes from colorful mirrored acrylic to make homemade Christmas ornaments      

Keep all the little cutout pieces! You'll need them for the color-mixing stage.

Repeat until you have seven complete snowflake outlines and all their corresponding cutout pieces.

Colorful starburst ornament featuring teal, green, gold, and purple mirrored acrylic pieces

Step 3: Mix and Match the Colors

This is where the ornaments really come to life!

Lay out all seven snowflake outlines on your work surface. Sort the small geometric cutout pieces by color so you can see all the possibilities.

Close-up of reflective jewel-toned acrylic pieces in a handmade geometric Christmas star.

I wanted each snowflake to have a balanced mixture of colors rather than one ornament being mostly blue and another being mostly pink. I also didn't want to use the same color for the main outline and its interior pieces.

Instead, I used the cutout pieces from the other snowflakes to fill each design. That way, every ornament could have its own unique color arrangement while still belonging to the same coordinated set.

Start by placing the pieces into the matching openings in each snowflake. Experiment with the placement until you like the overall balance.

Combining different mirrored acrylic colors to create unique geometric snowflake ornaments

I spent a full hour rearranging the pieces! Yes, an entire hour. I wanted the colors to be evenly mixed across all seven snowflakes, so no single ornament looked too heavy in one color.

It was a little like putting together seven tiny stained-glass puzzles...and I do not enjoy puzzles.

Try alternating warm and cool colors, placing contrasting shades next to one another, and spreading the brightest colors throughout the design. The mirrored surfaces catch the light beautifully, so even small changes in color placement can make a big difference.

Purple, pink, teal, blue, and gold acrylic pieces arranged in a symmetrical snowflake design

Take your time during this step. Since the cutout pieces are interchangeable, you can keep rearranging them until all seven designs look balanced together.

Once you're happy with the color combinations, leave the pieces in their respective openings so you can secure them.

DIY mirrored acrylic snowflake featuring alternating colors and intricate triangular shapes

Step 4: Cover the Front with Painter's Tape

Once you've arranged all the acrylic pieces into your seven snowflake designs, it's time to hold everything in place.

Carefully cover the front of each snowflake with painter's tape. Use enough tape to span the design and keep all the little geometric pieces from falling out when you turn it over.

Mirrored acrylic star ornament covered in blue painters tape.

Press the tape down gently so it holds the pieces securely, but avoid rubbing aggressively across the mirrored surfaces.

The goal is to create a temporary backing that keeps every piece in the exact position you chose during the color-mixing stage.

Once the front is covered, carefully lift each snowflake and turn it over. The painter's tape should hold the separate pieces together while exposing the back for the permanent backing.

Work slowly, especially around the points and narrow sections of the snowflakes. These delicate geometric shapes can shift if you flip them too quickly.

Repeat for all seven ornaments.

Backside of mirrored acrylic star ornament ready to be sealed to basswood

Step 5: Avoid My Adhesive Mistake!

Now for the part I learned the hard way.

My first attempt at assembling the snowflakes involved using a very thin, runny acrylic adhesive on the back of the pieces. I thought it would be an easy way to hold everything together.

Unfortunately, the adhesive seeped through the tiny gaps between the geometric pieces and onto the mirrored front surface. It left behind a foggy, crusty residue that completely ruined the shiny finish.

Not exactly the sparkling Christmas ornaments I had envisioned! (DO NOT USE WHAT I USED)

Acrylic cement, do not use for this craft project

Rather than trying to clean up the mess, I cut the snowflakes out again and started over. I repeated the color-mixing process, which meant another round of arranging all those tiny pieces.

This time, I changed the entire assembly method.

Instead of applying liquid adhesive directly to the back of the acrylic, I used painter's tape to hold all the pieces together temporarily. Then I attached a solid basswood backing using 3M adhesive.

This made a much cleaner project because the adhesive was sandwiched between the wood and acrylic instead of being applied where it could seep through the design.

If you're making these ornaments, I highly recommend skipping the runny adhesive method. The extra preparation is worth it for a crisp, sparkling finish.

3M 468MP Adhesive sealed to the back of basswood ready to cut with the laser

Step 6: Cut Seven Basswood Backings

Next, create a solid backing for each mirrored acrylic snowflake.

Roll out the 3M  468MP Adhesive and press it onto the backside of the 3mm Basswood pieces. The 3M is designed to cut perfectly with the laser.

I used 3mm basswood for the backing. Rather than cutting another detailed geometric design, I only needed the outer silhouette of the snowflake.

Cutting a 3mm basswood backing piece for mirrored acrylic star ornaments with an xTool P3 laser.

In xTool Studio, prepare the simple snowflake outline and size it to match the mirrored acrylic design. You'll want the backing to align with the outer edges without covering the colorful mirrored surfaces.

Cut seven basswood silhouettes using the appropriate settings for your material and machine.

Using the xTool P3 laser cutter to cut a wooden backing for DIY geometric snowflake ornaments.

Before moving on, check that the wood outlines match the acrylic snowflakes. A little difference around a complicated geometric edge can be noticeable, so it's worth checking the alignment before attaching everything permanently.

These wood pieces provide a solid surface for the adhesive and help hold all the individual acrylic sections together as one ornament.

Peel 3M backing off the basswood

I used 3M adhesive that comes on a roll to back the basswood pieces. The adhesive creates a thin, even bonding layer between the wood and the mirrored acrylic.

Peel 3M backing off the basswood

Now it's time to simply remove the sticker backing of the adhesive and press it onto the backside of the mirror acrylic.

Stick the basswood to the backside of the mirrored acrylic star ornament

Using a sheet or roll adhesive instead of a runny liquid made a huge difference. There was no liquid adhesive to seep through the tiny openings and leave residue on the mirrored front.

It's a simple change, but it made the difference between a frustrating project and a beautiful finished set.

DIY Christmas ornaments made with an xTool P3 and seven colors of mirrored acrylic.

Step 7: Attach the Basswood Backing

With the mirrored acrylic pieces still held together by painter's tape, remove the protective backing from the 3M adhesive.

Carefully align the adhesive-covered basswood silhouette with the back of the snowflake. Check the outer points and edges before pressing the layers together.

Once everything is aligned, press the basswood against the acrylic so the adhesive bonds across the back of the design.

Colorful geometric star ornaments ready to hang on a Christmas tree.

Work over a flat surface and use even pressure, following the adhesive manufacturer's bonding instructions. Avoid bending the snowflake or pressing so hard that the delicate acrylic sections shift.

Repeat this process for all seven ornaments.

The basswood backing holds the separate mirrored acrylic pieces together, transforming the loose collection of geometric shapes into a sturdy, finished snowflake.

The basswood could also be engraved with the P3 and then given as gifts!

Handmade mirrored acrylic snowflakes with reflective purple, pink, teal, green, blue, and gold details.

Step 9: Remove the Painter's Tape

This is the satisfying part!

Once the basswood backing is securely attached, carefully peel the painter's tape away from the front of the snowflake.

Pull it back slowly rather than yanking it straight up. This helps reduce the chance of disturbing any small pieces or lifting an edge.

As the tape comes off, the shiny mirrored acrylic is revealed, with every colorful geometric piece held neatly in place.

And just like that, you have a sparkling, multicolored snowflake ornament!

Repeat for the remaining six ornaments.

Inspect each snowflake for any adhesive that extends beyond the edges, any pieces that have shifted, or any corners that need additional attention. Avoid using harsh solvents or abrasive cleaners on mirrored acrylic, as these may damage the finish.

The final result is a collection of seven geometric snowflakes with bright, reflective colors and a clean, professional-looking finish.

A collection of seven unique laser-cut starburst ornaments made from colorful mirrored acrylic.

Step 10: Add Hangers and Decorate!

Now that your ornaments are assembled, they're ready to hang.

The geometric snowflake design has plenty of points and angles, so choose a hanging method that works with the finished shape and keeps the ornament secure. You can use a suitable ornament hook, ribbon, or thread attached to a reinforced hanging point.

If your chosen design includes a small hole near the top, make sure the hole is large enough for your hanger and that the surrounding material is strong enough to support the ornament. If it doesn't, plan a suitable attachment point before assembly.

Hang the snowflakes on your Christmas tree, in a window, or along a decorative garland where the mirrored surfaces can catch the light.

I love how the colors reflect the surrounding lights and decorations. Each snowflake has a slightly different color arrangement, but the matching geometric design ties the entire collection together.

Seven ornaments make a substantial impact on a tree, especially when you spread them throughout the branches rather than clustering them in one spot.

They're colorful, sparkly, and just different enough to make the tree feel special.

Finished geometric snowflake ornaments showing different color combinations and intricate patterns.

Tips for Making Mirrored Acrylic Snowflake Ornaments

  • Choose colors that work well together. A coordinated palette makes the seven ornaments look like a set, even when every color combination is different.

  • Keep all the cutout pieces. The interchangeable pieces are what make it possible to create seven unique designs from seven sheets of colored acrylic.

  • Take your time arranging the pieces. I spent an hour balancing the colors, and it was worth the effort.

  • Use painter's tape to hold the pieces together before turning the snowflake over. This simple step makes assembly much easier.

  • Avoid runny adhesive on the back of the acrylic. It can seep through the openings and leave cloudy residue on the mirrored finish.

  • Use a thin, even layer of suitable adhesive. Keeping the adhesive inside the basswood outline helps prevent messy edges.

  • Test your materials first. Check compatibility between your mirrored acrylic, 3M adhesive, and basswood before committing to the entire set.

  • Handle the finished ornaments carefully. Although the wood backing helps secure the pieces, the narrow geometric sections still deserve gentle handling.

Colorful acrylic Christmas decorations featuring symmetrical geometric stars and reflective jewel tones.

Frequently Asked Questions

Can I use different colors of mirrored acrylic?

Absolutely! That's one of my favorite things about this project. You can use any combination of compatible mirrored acrylic colors. Try traditional red and green, icy blue and silver, jewel tones, or a bright rainbow palette.

DIY mirrored acrylic star ornaments arranged in a cluster to show all seven finished designs

Do all seven snowflakes have to look different?

Not at all. You can repeat the same color arrangement if you prefer a more uniform look. I chose seven different combinations because I wanted to use the cutout pieces from the other designs and create a coordinated collection with lots of variation. The way I created my 7 ornaments was the most material efficient way to do it.

Why use basswood backing?

The 3mm basswood provides a solid surface to attach the individual acrylic pieces. It helps hold the geometric sections together and gives the finished ornament more stability than relying on tiny adhesive connections between the acrylic pieces alone.

Seven finished mirrored acrylic star snowflake ornaments displayed together after laser cutting and assembly.

Why not glue the pieces together with liquid acrylic adhesive?

A thin, runny adhesive can travel through the narrow gaps between the pieces and reach the mirrored front. That's exactly what happened during my first attempt, leaving a foggy, crusty residue. Using painter's tape to hold the design together and attaching an adhesive-backed basswood silhouette was a much cleaner solution.

Can I make these ornaments smaller or larger?

Yes! You can resize the geometric snowflake design to suit your tree or decorating style. Keep in mind that very small designs may have narrow sections that are more delicate to assemble, while larger designs will require more material.

Seven handmade star-shaped snowflake ornaments created with an xTool P3 laser cutter

Can these be made as gifts?

Definitely! A set of colorful mirrored snowflakes makes a memorable handmade gift for anyone who loves unique Christmas decorations. You could package each ornament individually or give all seven together as a coordinated set.

If you're considering ordering ready-made clear acrylic ornaments or custom promotional products for a business or event instead, compare the details carefully. Look at setup charges, available imprint colors, free shipping offers, transit times, and delivery dates. During the holiday season, some vendors have extended production times, so check the estimated schedule before adding items to your shopping cart. It's also worth reviewing the vendor's privacy policy before submitting personal or payment information.

For me, though, making these with my xTool P3 was all about creating something colorful and personal. The time spent arranging the pieces made the final ornaments feel even more special.

Multicolored mirrored acrylic snowflake ornaments with pointed starburst designs

That's it!

These mirrored acrylic snowflake ornaments were definitely a labor of love. Cutting the seven designs was the easy part. Arranging all the tiny pieces, balancing the colors, and figuring out the best way to attach everything took much more time than I expected.

But the finished ornaments were worth it!

I love that every snowflake is unique while still looking like part of a matching set. The mirrored acrylic catches the light, the geometric pattern adds lots of detail, and the seven different color combinations make the ornaments pop against the Christmas tree.

Seven unique geometric star ornaments made with a laser cutter and colorful mirrored acrylic.

If you have a laser cutter and some colorful mirrored acrylic, this is a fantastic project to try. Download the free geometric snowflake design, experiment with your favorite color combinations, and make a set of ornaments that will leave a lasting impression year after year.

Have fun creating your own colorful snowflakes!

Like, Pin and Save!

Finished DIY snowflake ornaments with reflective jewel-toned acrylic pieces and geometric cutouts.

CHECK OUT OTHER FUN XTOOL P3 PROJECTS HERE:


How to Make Wooden Laser Cut Name Puzzles with xTool

Looking for a fun, personalized project that makes an adorable handmade gift? These custom name puzzles are one of my favorite projects to make with my xTool P3 CO2 Laser cutting machine! 

Made from 3/8-inch Baltic birch plywood and backed with 1/8-inch basswood, these wooden puzzles are sturdy, colorful, and completely personalized for the recipient.

How to Make Wooden Laser Cut Name Puzzles with xTool Looking for a fun, personalized project that makes an adorable handmade gift? These custom name puzzles are one of my favorite projects to make with my xTool P3 CO2 Laser cutting machine!   Made from 3/8-inch Baltic birch plywood and backed with 1/8-inch basswood, these wooden puzzles are sturdy, colorful, and completely personalized for the recipient.


How to Make Acrylic Name Keychains DIY with xTool P3

There’s something extra special about having your name on something—especially when it’s colorful, handmade, and just plain cute! 

These pastel acrylic name keychains are a fun project to make with the xTool P3 CO2 Laser, and they come together with just a few pieces of acrylic and some colorful hardware.

How to Make Acrylic Name Keychains DIY with xTool P3 There’s something extra special about having your name on something—especially when it’s colorful, handmade, and just plain cute!   These pastel acrylic name keychains are a fun project to make with the xTool P3 CO2 Laser, and they come together with just a few pieces of acrylic and some colorful hardware.


How to Laser Cut a Felt Banner with the xTool P3 Machine

There is something wonderfully old-fashioned about a hanging felt banner, but using a laser cutter to create one takes it to a whole new level. Instead of painstakingly cutting every little detail by hand, you can create beautifully intricate patterns with clean edges and precise cutting in a fraction of the time.

How to Laser Cut a Felt Banner with the xTool P3 Machine There is something wonderfully old-fashioned about a hanging felt banner, but using a laser cutter to create one takes it to a whole new level. Instead of painstakingly cutting every little detail by hand, you can create beautifully intricate patterns with clean edges and precise cutting in a fraction of the time.


CHECK OUT MORE ON THE XTOOL P3 HERE:

The xTool P3 is xTool’s flagship CO2 laser system, designed for creators who want professional-grade results without stepping into the intimidating world of traditional industrial laser equipment. It combines industrial performance, smart laser technology, advanced safety features, and an incredibly intuitive workflow into one powerful machine.

How to Make a Laser Cut Wooden Unicorn Puzzle DIY with xTool P3

If you have a little unicorn lover in your life, this colorful wooden unicorn puzzle is such a fun handmade project! I made this adorable animal puzzle using my xTool P3 CO2 Laser cutting machine, 3/8-inch Baltic birch plywood, and 1/8-inch basswood.

How to Make a Laser Cut Wooden Unicorn Puzzle DIY with xTool P3 If you have a little unicorn lover in your life, this colorful wooden unicorn puzzle is such a fun handmade project! I made this adorable animal puzzle using my xTool P3 CO2 Laser cutting machine, 3/8-inch Baltic birch plywood, and 1/8-inch basswood.




facebook Follow Me on Pinterest Youtube Instagram twitter
postscript

Comments