Glitter Resin Tumbler with Cricut Vinyl DIY

This post may contain affiliate links, sponsored content and products received at no cost.
6:00 AM
Make a glitter tumbler with cricut vinyl and high gloss resin, great for a gift

 Glitter Resin Tumbler with Cricut Vinyl DIY

Are you on the tumbler craze yet?  This was my first one and I love the intense glitter!  Make a glitter tumbler for school teachers, summer camps or as fun gifts.  Customize them with favorite colors or names and intensity of glitter.  It's a great reminder to drink plenty of water each day...or perfect for a warm drink on a cold morning. 
Be Happy glitter stainless steel tumbler great for gifts
It shines in the sunlight like a beacon!  Note, this is not dishwasher safe...but I wouldn't wash a stainless steel tumbler in the dishwasher anyway.  Just hand wash to be safe.  Let's get started!

Supplies Needed:

Stainless Steel Tumbler
Chunky Glitter
Envirotex Lite Pour On High Gloss Finish
Glitterific Paint
Dishwasher Safe ModPodge
Chrome Vinyl cut with Cricut Maker
Painters Tape
Begin by wiping the tumbler down with rubbing alcohol.
Then tape off the top edge and the bottom edge of the tumbler with blue painters tape.
Begin painting the glitterific paint all over the visible tumbler.  Coat the entire tumbler and let it dry.  Then mix some chunky glitter with the modpodge and paint it all over the tumbler.  Then let it dry completely.
Use the Cricut Maker to cut out a phrase or name in metallic vinyl or adhesive foil.
Once the tumbler is completely dry, sand the glitter so the surface is smooth enough to stick vinyl to.  Apply the cut vinyl to the tumbler, right on top of the glitter.
Now we need a cup turner station

This cup turner would be awesome!

I used a long dowel shoved through holes in a cardboard box.  Then a piece of a pool noodle shoved on the end the of the dowel.

Now mix up the high gloss resin according to the package directions.
Mix thoroughly in the 2 phase process.
Now use a stirring stick to spread the resin over the tumbler...on the turning station.  Turn slowly and constantly for the first 30 minutes.  This is where the electric station would be fantastic!
Use a straw to pop any bubbles that formed after the 30 minutes of turning.
Then turn the cup a 1/4 turn every minute for the next 30 minutes.   Then turn every 1/4 turn each 2-3 minutes...and continue to turn periodically for the next 4-5 hours.  Again, getting an electric turner would eliminate all this extra time commitment.
Gently check the resin after the 5 hours and see how much it has set up.  If it still feels sloppy, then keep the turning going...otherwise leave it to dry overnight.

Then let it sit overnight.  Next day, peel off the painters tape.
The tape will leave a clean line, perfect for drinking out of or keeping the resin away from your lips.
That's it!  It looks fabulous, although hard to photograph with all the shiny resin gloss!
Like, Pin and Share!
Silver glitter tumbler coated in high gloss resin with metallic vinyl adhesive foil, great for handmade gifts or to sell.

Check out these fun Resin Crafts too!

And this awesome paint poured tray coated in high gloss resin!

facebook Follow Me on Pinterest Youtube Instagram twitter
This post published on Doodlecraft first