DIY: Clear Casting Resin Paperweights


This post may contain affiliate links, sponsored content and products received at no cost.
6:00 AM
This posted over at Resin Blog Crafts a couple months ago.
ETI sent me all this fun resin in exchange for this sponsored post.
DIY: Resin Paperweights
I had some things that I wanted to keep but needed a cool way to display them...
Resin paperweights are a perfect solution.  They are a great way to make something personal, a great gift idea.  You can embed just about anything in resin.
 You will need:
Items to embed
(examples: dandelion, succulent, fossils and wasp paper)
 Read the resin instructions.
Make sure you have everything you need ready to go.
Read the instructions again.
Then mix the resin according to the package directions.
Pour about 1/4 inch in each mold and let it set until it reaches a gel like consistency.
(took me about an hour or 2)
 Then gently set the item in the gelled resin face down.
You will notice that the fresh vegetation (ie: succulent and dandelion) discolor after hardening.
Let the resin sit another couple hours.  Then mix up some more resin and pour it over the top to fill the mold.  Let it cure for a week or so.
 Then pop it out and enjoy your paperweights!  You'll see the green color of the succulent has reduced.  But it's still really cool!
At this point you will be looking all over your house trying to find new things to put in resin!
It's THAT fun.
 Next I did the same technique with a full dandelion bloom.  Just gently set it in the gelled resin...and let it sit for a while.
 Then fill the mold with more resin to encase the rest of the dandelion.
The dandelion held perfectly, just pour the resin in on the side and let it fill in the spaces around the wisps.
 It is so amazing!  I love that it is a complete blossom of seeds in there!
 I used some wasp paper.  It has the coolest "zebra-striped" patterns.
 I filled the mold with about a half inch of resin.  Slipped a piece of wasp paper right on top and then gently pushed with a stick to get the paper in half way.
 Let it dry and pop it out!
 The last one are these cool fossils.  They are called Crinoids...they look like little screws and machine parts, but they are primitive animal, similar to a sea star.  I just dropped them in after the resin set to a gel consistency.  See how they are just floating on the resin?  Perfect.
 I filled it up.  These little tiny fossils are so delicate that it would be easy for them to break, so this is a great solution to enjoy them.
 After a couple hours, I poured more resin on them to cover them completely.
 Let them harden completely.  A good way to know if they are hard is that they will not smell like resin at all.  And trust me, this stuff smells.  Work in the garage or well ventilated area.
Now enjoy your paperweights!  Give them as gifts, encase things that are important to keep.  Maybe get crazy and encase baby teeth, your first house key, even candy!
Like, Save, Pin, Share, Comment and Follow!







facebook Follow Me on Pinterest Google+ Instagram twitter
Photobucket
This post published on Doodlecraft first 

Comments